VF-3YT
TRAVELS	S.A.E.	Metric
X Axis	40 "	1016 mm
Y Axis	26 "	660 mm
Z Axis	25 "	635 mm
Spindle Nose to Table (~ min)	4.5 "	114 mm
Spindle Nose to Table (~ max)	29.5 "	749 mm
TABLE	S.A.E.	Metric
Length	54 "	1372 mm
Width	25 "	635 mm
T-Slot Width	5/8 "	16 mm
T-Slot Center Distance	3.15 "	80.0 mm
Number of T-Slots	5
Max Weight on Table (evenly distributed)	3500 lb	1588 kg
SPINDLE	S.A.E.	Metric
Max Rating	20 hp	14.9 kW
Max Speed	7500 rpm	7500 rpm
Max Torque	75 ft-lb @1400 rpm	102 Nm @ 1400 rpm
Max Torque w/opt Gearbox	250 ft-lb @ 450 rpm	339 Nm @ 450 rpm
Drive System	Direct Speed Belt Drive
Taper Size	CT/40	CT/40
Bearing Lubrication	Air/Oil Injection
Cooling	Liquid Cooled
FEEDRATES	S.A.E.	Metric
Rapids on X	1000 in/min	25.4 m/min
Rapids on Y	1000 in/min	25.4 m/min
Rapids on Z	1000 in/min	25.4 m/min
Max Cutting	650 in/min	16.5 m/min
AXIS MOTORS	S.A.E.	Metric
Max Thrust X	2550 lb	11343 N
Max Thrust Y	2550 lb	11343 N
Max Thrust Z	4200 lb	18683 N
TOOL CHANGER	S.A.E.	Metric
Type	Carousel (SMTC Optional)	Carousel (SMTC Optional)
Capacity	20	20
Max Tool Diameter (full)	3.5 "	89 mm
Max Tool Weight	12 lb	5.4 kg
Tool-to-Tool (avg)	4.2 sec	4.2 sec
Chip-to-Chip (avg)	4.5 sec	4.5 sec
ACCURACY (1 AXIS)	S.A.E.	Metric
Positioning (±)	0.0002 "	0.005 mm
Repeatability (±)	0.0001 "	0.003 mm
GENERAL	S.A.E.	Metric
Air Required	4 scfm, 100 psi	113 L/min, 6.9 bar
Power Required (cont)	14 kVA; 200-250 VAC @ 50A, 3-phase; 50-60 Hz	14 kVA; 200-250 VAC @ 50A, 3-phase; 50-60 Hz
Machine Weight	14000 lb	6350 kg